Metallography specimen automatic polishing machine

Metallography specimen automatic polishing machine

Product DescriptionUsage:

P-2 metallographic sample polishing machine (the following is referred as polishing machine) is applied to the polishing for the grinded metal material; it can get a bright metal surface, for observation under the microscope and determination of microstructure.

Structural features outlined:

Polishing Machine is made of welding holder, the table top, polishing plate, polishing fabric, polishing cover and switch boxes and other basic components. Two polishing plates are installed under the work top which is available for the operation of two people at the same time, it is very convenient. Two electric motors are placed under the work-table, connected with surface by fixed-film. The fixed polishing plate’ cone axis is connected with the motor through Spiral shell needle. Polishing fabric are fastened on the throwing plate through the ferrule, the starting and ending of the motor are controlled by the Switch installed in the switch box from the opening up control, after the starting of the motor, we can exert pressure on the specimen by hand, carry out the polishing on the rotating polishing plate .The added polishing liquid in polishing process of polishing liquid can drain through the plastic disk add fixed at the table. Polished covers and covered can prevent dust and other debris fall on the machine in the process of stopping of it, so it will not influence the results of using.