2018 Hot seller!automatic mounting press for metallographic preparation

automatic mounting press for metallographic preparation

Product Description

Description of the Metallographic Sample Mounting Presses :

Model  Metallographic Sample Mounting Presses are suitable for the thermos-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take. After forming, it will be very easy for the grinding, polishing of the specimen and it is also convenient for people to measure the metallographic structure under metallographic microscope.

The machine may work stably under the following working conditions:

The height is no more than 1000m;

The temperature of surrounding medium can not be lower than -10 °C or over 40 °C;

The relative humidity of air should be no more than 85% (20 °C).

The voltage fluctuation should be no more than 15% and there should be no obvious vibration source around.

There should be no current conducting dust, explosive and corrosive air.

Specification of the machine:

Model	2B
Specification of the Sample	22*15mm, 30*15mm, 45*18mm
Heater Specifications	650W,220V,50Hz
Range of Temperature Adjusted	100~180°C
Power supply	Voltage fluctuations within±15%, 220V,50Hz
Dimension	330*260*420mm
Net Weight	33 Kg